Esfahan Steam Equipment - SV1 POP TYPE SAFETY VALVES

3. SV1 POP TYPE SAFETY VALVES

Description:
	The SV1 safety valve is suitable for use on steam and hot water at low pressure (10-30 psi).

Limiting Conditions :

Maximum allowable pressure	30 psi
Minimum allowable pressure	10 psi
Maximum allowable temperature	125 °C
End connection	Screwed
Maximum cold hydraulic pressure test	150 psi

Operating Range:

10 to 30 psi by the order

Note: 20 psi is always available. Other pressure sets will be available on request.

Dimensions (Inch ) (mm):

Sizes and Pipe Connections:

Intel PT 3", male (R3-DIN2999) .
Outlet PT 3", female (PR3-DIN2999).

Materials:

Safety Valves Capacities for Steam (Ib/h):

	10	15	20	25	30
3"	3410	3830	4350	4970	5520

Installation:

The Safety valve should always be fitted with the center line of the spring housing vertically above the valve.

Note: The condensed drain must be fitted.

How to Order:

Example: 3" SV1 inlet set at 20 psi.

Design and specifications are subject to change without notice.