Esfahan Steam Equipment - 662 TYPE THERMODYNAMIC STEAM TRAP

3. 662 TYPE THERMODYNAMIC STEAM TRAP

Description:
	The 662 type is a maintainable thermodynamic steam trap. The 662 is specifically designed for relatively small condensate loads and therefore is ideal for mains drainage application.

Limiting Conditions :

PMO - Maximum operating pressure	42 kfg/cm²
TMO - Maximum operating temperature	400°C
PMOB - Maximum back pressure should not exceed	75% of the inlet pressure
Minimum operating differential pressure for satisfactory operation	1 kgf/cm²
Maximum body design conditions	PN 63
PMA - Maximum allowable pressure	63 kgf/cm²
TMA - Maximum allowable temperature	400°C
Cold hydraulic test pressure	95 kgf/cm²

Dimensions / Weights (mm/kg):

Size	A	B	C	Weight (kg)
¹/₂"	40	50	75	0.8
³/₄"	45	60	90	1.0
1"	50	60	95	1.5

Operating Range:

∆ PMX - Maximum differential pressure 42 kgf/cm²

Sizes and Pipe Connections:

¹/₂", ³/₄" and 1" screwed (DIN 2999) or socket weld.

Materials:

No.	Part	Material
1	Body	S.S. AISI 420
2	Disc	S.S. AISI 430
3	Strainer Screen	S.S. AISI 316
4	Strainer Cap	S.S. AISI 416
5	Cap	S.S. AISI 416
6	Blowdown Cap	S.S. AISI 416
7	Blowdown Valve Screw	S.S. AISI 416

Optional Extra :

Integral blowdown valve - The integral blowdown valve is an assembly designed to be fitted to 662 type steam trap.

Capacities:

Maximum Continual discharge amount (k/h)

	1	5	10	20	30	40
¹/₂"	150	300	400	550	700	900
³/₄"	300	450	600	800	1000	1100
1"	450	600	900	1400	1700	1900

Installation:

The trap should preferably be installed in the horizontal plane, with a small drop leg preceding it. Where the trap discharges into a closed return system, a non-return valve should be fitted downstream to prevent return flow. Ensure all connection ports are clear from any obstruction. Always open isolation valves slowly until normal operating conditions are achieved. This will avoid system shocks. Check for leaks and correct operation. Always ensure correct tools, safety procedures and protective equipments are used at all times.

How to Order:

Example: ¹/₂" - 662 - Thermodynamic steam trap screwed with blowdown valve.

Design and specifications are subject to change without notice.