Esfahan Steam Equipment - 552 TYPE BALL FLOAT STEAM TRAP ( Screwed )

2. 552 TYPE BALL FLOAT STEAM TRAP ( Screwed )

Description:
	The 552 is a cast iron ball float steam trap with horizontal connections with flow from left to right. It is available in two models: a- With a manually adjustable air venting needle valve ( Model 552 F ) b- With integral automatic thermostatic air venting facility ( Model 552 FT )

Limiting Conditions :

Body design conditions	PN 16
PMA - Maximum Allowable pressure	10 kgf/cm²
TMA - Maximum Allowable temperature	185°C
Cold hydraulic test pressure	20 kgf/cm²

Dimensions (mm):

Size	d	L	H1	H2	W	Weight ( KG )
1/2"	1/2"	120	45	45	130	2.5
3/4"	3/4"	120	45	45	130	2.5

Operating Range:

∆ PMX - Maximum differential pressure.

Model	∆ PMX

552-F	10 kgf/cm²

552-FT	10 kgf/cm²

Sizes and Pipe Connections:

¹/₂ " and ³/₄ " screwed DIN 2999.

Materials:

No.	Part	Material
1	Body	G.G.25
2	Gasket	Clingrit
3	Ball	S.S. 304
4	Ball Assembly	S.S. 304
5	Bolt	S.S. 304
6	U Support	S.S. 304
7	Pin	S.S. 304
8	Seat	S.S. 304
9	Adjusting Nut	S.S. 304
10	Spacer	G.G.25
11	Cap Channel	G.G.25
12	Bolt	S.S. 304
13	Bolt	C.S. Galva
14	Nut	C.S. Galva
15	Adjusting Bolt Air	Brass
16	Name Plate	Aluminum
17	Pin	Aluminum

Capacities:

Maximum Continual discharge amount ( l/h)

	0.5	1	2	4	5	8	10
¹/₂ "	200	250	320	370	440	540	620
³/₄ "	200	250	320	370	440	540	620

Note: Capacities shown are based on discharge at saturation temperature. In 552- FT, when discharging sub-cooled condensate the air vent provides extra capacity. Under start up conditions the thermostatic air vent will be open, and will provide additional condensate capacity to outlet.

Installation:

The trap must be fitted with the float arm in a horizontal plane that is rise and falls vertically. Therefore the arrow on nameplate must point downwards.

How to Order:

Example: 552 - F- ¹/₂ " float steam trap.

Design and specifications are subject to change without notice.